JM39015/2-003WP BOURNS RESISTOR (BLUE)

Description

JM39015/2-003WP RESISTOR
JM39015/2-003WP ALSO KNOWN AS * RTR22DW501P *
E101 LOT 33769
Technical Data
| NSN 5905-01-057-7721
Characteristic
Specifications
SECTION QUANTITY
1
ELECTRICAL RESISTANCE PER SECTION
500.0 OHMS SINGLE SECTION
RESISTANCE TOLERANCE PER SECTION IN PERCENT
-5.0 TO 5.0 SINGLE SECTION
STANDARD TAPER CURVE PER SECTION
A SINGLE SECTION
TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS
-50.0 TO 50.0 SINGLE SECTION
POWER DISSIPATION RATING PER SECTION IN WATTS
0.75 FREE AIR SINGLE SECTION
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER
85.0 SINGLE SECTION
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER
150.0 SINGLE SECTION
BODY STYLE
32B RECTANGULAR W/MOUNTING HOLES
BODY LENGTH
0.515 INCHES NOMINAL
BODY WIDTH
0.205 INCHES NOMINAL
BODY HEIGHT
0.500 INCHES NOMINAL
LATERAL DISTANCE BETWEEN MOUNTING HOLE CENTERS
0.520 INCHES NOMINAL
ACTUATOR TYPE
SINGLE SHAFT
SHAFT STYLE
3C ROUND, SLOTTED
SHAFT DIAMETER
0.078 INCHES NOMINAL
SHAFT LENGTH
0.045 INCHES MAXIMUM
ROTARY ACTUATOR TRAVEL IN ANGULAR DEG
7200.0 MINIMUM AND 15120.0 MAXIMUM
ACTUATOR TRAVEL CONTROL FEATURE
CLUTCH
EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION
7200.0 MINIMUM AND 15120.0 MAXIMUM
MOUNTING METHOD
TERMINAL AND UNTHREADED HOLE
MOUNTING FACILITY QUANTITY
2
MOUNTING HOLE DIAMETER
0.073 INCHES NOMINAL
TERMINAL TYPE AND QUANTITY
3 PIN
CENTER TO CENTER DISTANCE BETWEEN TERMINALS
0.200 INCHES NOMINAL
CENTER TO CENTER DISTANCE BETWEEN CENTER TERMINAL AND OUTSIDE TERMINAL
0.100 INCHES NOMINAL
TERMINAL LENGTH
0.172 INCHES MINIMUM
TERMINAL LOCATION
REAR END
RELIABILITY INDICATOR
ESTABLISHED
RELIABILITY FAILURE RATE LEVEL IN PERCENT
0.100
TEST DATA DOCUMENT
81349-MIL-R-39015 SPECIFICATION
SPECIFICATION/STANDARD DATA
81349-MIL-R-39015/2 GOVERNMENT SPECIFICATION
III OVERALL HEIGHT
0.500 INCHES NOMINAL
III OVERALL WIDTH
0.205 INCHES NOMINAL
III CUBIC MEASURE
0.053 CUBIC INCHES
III FRAGILITY FACTOR
MODERATELY DELICATE
MANUFACTURERS CODE
81349
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE
MIL-R-39015/2
MANUFACTURERS CODE
81349
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE
M39015/2-003WP