NI SC-2062, 8 Channel 6A@30VDC SPDT Relays, National Instruments *Tested*

Description

National Instruments (NI) SC-2062, DIO accessory providing 8 channels SPDT relays. All channels have been tested and each NO-NC contact resistance has been found to be good, relative to NI SC-2062 relay specifications, with no contact near end of life.The SC-2062 is in good condition with minor cosmetic wear- refer to photos for condition of representative unit (one of those available). Listing is for one each SC-2062 accessory as described, in OEM padded shield bag as shown, nothing else is included. Each SC-2062 has assembly part # 180935C-01, with standoffs and same staggered relay configuration (to reduce interaction between neighboring energized coils).
Product information-
The National Instruments SC-2062 has eight electromechanical relays controlled by digital output signals from National Instruments DAQ devices. These relays switch many loads that require more power than is available with DAQ digital output lines. Each SC-2062 has screw terminals connected to eight sets of SPDT relay contacts. These contacts can handle 6 A at 30 VDC or 250 Vrms. When the digital output line from the board is in the low (0) state, the contact labeled NC (normally closed) is connected inside the relay to the contact labeled COM (common). When the digital output line is in the high (1) state, the NO (normally open) contact is connected to the COM contact.
The SC-2062 will be sent by USPS Priority Mail, insured. the tracking # will be entered
into ebay and paypal systems after shipment.