-40%
NI SCB-68, Shielded Connector Block for E-Series DAQ, National Instruments
NI SCB-68, Shielded Connector Block for E-Series DAQ, National Instruments
NI SCB-68, Shielded Connector Block for E-Series DAQ, National Instruments
NI SCB-68, Shielded Connector Block for E-Series DAQ, National Instruments
NI SCB-68, Shielded Connector Block for E-Series DAQ, National Instruments
NI SCB-68, Shielded Connector Block for E-Series DAQ, National Instruments
NI SCB-68, Shielded Connector Block for E-Series DAQ, National Instruments
NI SCB-68, Shielded Connector Block for E-Series DAQ, National Instruments

NI SCB-68, Shielded Connector Block for E-Series DAQ, National Instruments

$ 47.52

Availability: 100 in stock
  • Item must be returned within: 30 Days
  • Bundle Listing: No
  • Restocking Fee: No
  • All returns accepted: Returns Accepted
  • Model: SCB-68
  • MPN: 182469C-01
  • Condition: National Instruments (NI) SCB-68, shielded connector block. The devices are in good condition with some cosmetic scuffs or scratches- refer to photos for representative unit. Each unit includes side retaining screws (not shown in photos), and an E-series DAQ pinout label installed inside lid. Listing is for one SCB-68 each as described and shown, nothing else is included.
  • Return shipping will be paid by: Buyer
  • Country/Region of Manufacture: Hungary
  • Brand: National Instruments
  • Refund will be given as: Money Back

    Description

    National Instruments (NI) SCB-68, shielded connector block.  The devices are in good condition with some cosmetic scuffs or scratches- refer to photos for representative unit condition. Each unit includes side retaining screws (not shown in photos), and an E-series DAQ pinout quick reference label installed inside lid. Listing is for one SCB-68 device each as described and shown, nothing else is included. The devices have assemly part # 192469C-01.
    from NI-
    NI SCB-68 is a shielded I/O connector block for interfacing I/O signals to plug-in data acquisition (DAQ) devices with 68-pin connectors. Combined with the shielded cables, the SCB-68 provides rugged, very low-noise signal termination. It is compatible with single- and dual-connector NI X Series and M Series devices with 68-pin connectors. The connector block is also compatible with most NI E, B, S, and R Series DAQ devices.
    Shielded I/O connector block for use with 68-pin X, M, E, B, S, and R Series DAQ devices
    Screw terminals for easy I/O connections or for use with the CA-1000
    2 general-purpose breadboard areas
    Onboard cold-junction compensation sensor for low-cost thermocouple measurements
    The SCB-68 will be packaged in box and sent via USPS Priority Mail, insured. the tracking # will be entered
    into ebay and paypal systems after shipment.